• 0
    Your cart is empty

Diagnostic code Analyzer- Blog

P1206 Failure Motor fault Error Anti-particulate system

P1206 Failure Motor fault Error Anti-particulate system

23/12/2018
Procedure to Follow: Heat the engine Continue for a few kilometers with a constant 3000 revolutions engine If the problem persists proceed with the cleaning of the FAP. It is also possible to eliminate the Particulate Device with modification in the control unit: Contact us Pure DIASTOGN......continue »

P0202 Cylinder 2 Injector Circuit Malfunction

P0202 Cylinder 2 Injector Circuit Malfunction

23/12/2018
Symptoms: Ignition of engine failure warning light Light tears at the start Irregularities in the engine Solutions: Reset / Clean engine management center connectors Spark Plug Faulty Coil not 100% DIAGNOSIS USED: ARTIMINI TOPDON   ...continue »

U1602 Error line can Fiat

U1602 Error line can Fiat

23/12/2018
Symptoms: The engine sometimes does not start Ignition ABS warning light Red light of the steering wheel on Rpm / speed indicators go to 0 Solution: Replaced the instrument panel (No need to reprogram anything, it is possible to use a recovery instrument panel) DIAGNOSIS USED: ARTIMI......continue »

P2563 Boost pressure actuator position drift Fiat

P2563 Boost pressure actuator position drift Fiat

21/12/2018
Symptoms of a P2563 code may include: Malfunction indicator On Poor performance Hesitation during acceleration Increased fuel consumption The possible causes of this code are: Sensor Map Fault - very likely short circuit of the TBCPS sensor signal Wastegate line / Solenoid valve Turb......continue »

P0602 Audi / Vw / Seat / Skoda After Programming Obd (Kess V2 / X17 / Dimsport / ..)

P0602 Audi / Vw / Seat / Skoda After Programming Obd (Kess V2 / X17 / Dimsport / ..)

21/12/2018
Symptoms of a P0602 code may include: No start condition  Multiple drivability issues  Harsh or erratic automatic transmission shifting  Diminished fuel efficiency T he engine may stall or idle roughly Possible causes for this code include: PCM programming error  New or incorrect P......continue »

Topics


Blockbox Blindatura centralina motore